crazing

crazing的音标为[ˈkreɪzɪŋ] ，基本翻译为“开裂；疯狂；发疯；痴迷”，也可表示“(玻璃等) 裂纹”。速记技巧为：crazing，疯狂的，疯狂的玻璃。

以上内容仅供参考，建议到英语字典官网查询更多详细信息。

Crazing这个词的英文词源可以追溯到拉丁语中的“crassus”，意为“粗糙的，不均匀的”。它的主要变化形式是复数形式“craze”和过去式“crased”和“crashed”。

相关单词：

1. Crack（裂纹）：这个词与crazing有相似的含义，都是指物体表面出现的裂缝或不规则纹理。Crack的形成可能是由于材料的老化、腐蚀或机械损伤。

2. Crust（硬皮）：这个词与crazing也有相似之处，都指物体表面形成的硬质皮层。Crust的形成可能是由于材料表面的氧化、腐蚀或高温烧结。

3. Roughness（粗糙度）：这个词与crazing的区别在于，它更侧重于描述物体表面的不平整度，而crazing则更多地描述表面不规则的纹理。Roughness的形成可能是由于材料表面的机械损伤、化学腐蚀或热膨胀等。

以上这些单词都与crazing有密切的联系，它们都描述了物体表面出现的不同形式的缺陷或异常纹理。这些单词的出现和使用，也反映了材料科学和工程领域的发展和进步。

crazing常见短语：

1. crazing surface 表面裂纹

2. crazing layer 裂纹层

3. crazing phenomenon 裂纹现象

4. crazing damage 裂纹损伤

5. crazing layer thickness 裂纹层厚度

6. crazing layer quality 裂纹层质量

7. crazing evaluation 裂纹评价

双语例句：

1. The surface of the glassware has suffered from crazing due to ageing. 玻璃制品的表面由于老化而出现了裂纹。

2. The crazing of the ceramic tile can be caused by improper installation or improper cleaning methods. 瓷砖的裂纹可能是由于安装不当或清洁方法不当造成的。

3. The crazing of the paint on the car is caused by exposure to the elements. 车漆的裂纹是由于暴露在元素中造成的。

4. The crazing of the glassware is due to the high temperature during the manufacturing process. 玻璃制品的裂纹是由于制造过程中温度过高造成的。

5. The crazing of the stainless steel is caused by corrosion and wear and tear over time. 不锈钢的裂纹是由于腐蚀和磨损随着时间的推移而产生的。

6. The crazing of the paint on the wall is caused by moisture seeping into the wall from the ground below. 墙壁上的漆的裂纹是由于从地面渗入墙壁的水分造成的。

7. The crazing of the plastic is due to exposure to UV light and high temperatures during use. 塑料的裂纹是由于暴露在紫外线和使用过程中高温造成的。

英文小作文：

Protective Coating Crazing: Crazing is a common defect in protective coatings, which may cause degradation of coating performance and shorten its service life. To prevent crazing, it is necessary to pay attention to coating preparation, selection of appropriate coating materials, and application methods to ensure a smooth and even coating surface. In addition, ensuring proper storage and handling conditions for coatings can also help reduce the occurrence of crazing defects. By taking these measures, coating performance can be maintained for a longer period of time, resulting in better overall performance and cost savings for the end user.